北海道大学大学院工学研究院附属エネルギー・マテリアル融合領域研究センター

エネルギーメディア変換材料分野 秋山・能村研究室

研究業績

 

論文 特許 国際会議 講演 著書 解説 新聞・報道

 

国際会議

 

2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1992 1991 1990 1989 1989 1987


2019

 

Kinetic Analysis on Reduction of Carbon-Infiltrated Porous Hematite by Curve Fitting Method
K. Abe, A. Kurniawan, K. Ohashi, M. Sanada, T. Nomura, T. Akiyama
26th Regional Symposium of Chemical Engineering
Kuala Lumpur, Malaysia, 2019.10.30-31

 

Metallic phase change material for low-temperature thermal management
Kohei Kashiyama, Sheng Nang, Ade Kurniwan, Hiroki Sakai, Takahiro Nomura
International Congress on Energy Efficiency and Energy Related Materials
Oludeniz, Turkey, 2019.10.22-28

 

Improvement of Coal Utilization Efficiency through Tar Utilization as a Reducing Agent in Ironmaking Process
K. Abe, A. Kurniawan, M. Sanada, T. Nomura, T. Akiyama
International Congress on Energy Efficiency and Energy Related Materials
Oludeniz, Turkey, 2019.10.22-28

 

SOLUTION COMBUSTION SYNTHESIS OF DOPED Ca2AlMnO5 AS A NEW OXYGEN STORAGE MATERIAL
Ayumu Sato, Genki Saito, Keisuke Abe, Takahiro Nomura, Tomohiro Akiyama (Japan)
SHS2019(XV International Symposium on Self-Propagating High-Temperature Synthesis)
Russia, Moscow, MISIS(モスクワ鉄鋼合金製造大学) 2019.9.19
※Poster, Third Place Award 受賞

 

RAPID-HEATING-TYPE COMBUSTION SYNTHESIS OF METALLIC IRON: EFFECTS OF TEMPERATURE AND ATMOSPHERE
K. Abe, A. Kurniawan, M. Sanada, T. Nomura, T. Akiyama
XV International Symposium on Self-Propagating High-Temperature Synthesis
Moscow, Russia, 2019.9.16-20

 

page top

 

2018

 

Integrated Pyrolysis-Tar Decomposition of Polyethylene-Coal Blends over Low-Grade Iron Ores
A. Kurniawan, K. Abe, T. Nomura, T. Akiyama
International Conference on Chemistry, Chemical Process and Engineering (IC3PE)
Indonesia, Yogyakarta, 2018.8.14-15

 

Ethanol-Assisted Ironmaking of Mild-Dehydrated Goethite-Contained Ore
A. Kurniawan, K. Abe, T. Nomura, T. Akiyama
10th Japan-Brazil Symposium on Dust Processing-Energy-Environment in Metallurgical Industries
Japan, Sendai, 2018.9.19.

 

Rapid Reduction Process of Carbon-Infiltrated Goethite-Based Ore in an Oxygen Atmosphere
K. Abe, A. Kurniawan, M. Sanada, T. Nomura, T. Akiyama
10th Japan-Brazil Symposium on Dust Processing-Energy-Environment in Metallurgical Industries
Kawauchi campus, Tohoku Univ., 2018.9.18

 

Microencapsulation of High-Temperature Metallic Phase Change Material with Various Particle Sizes for Solar Energy Applications
Takahiro Nomura, Hiroki Sakai, Miki Haga, Yuta Hasegawa, Nan Sheng, Tomohiro Akiyama
SolarPACES 2018
Casablanca, Morocco, Hyatt Regency Casablanca (Poster Session) 2018.10.04

 

Granular thermal energy storage composite fabricated from high-temperature metallic phase change material
Hiroki Sakai, Yuta Hasegawa, Miki Haga, Nan Sheng, Tomohiro Akiyama, Takahiro Nomura
SolarPACES 2018
Casablanca, Morocco, Hyatt Regency Casablanca 2018.10.04

 

Development of Ni-supported core-shell type phase change material for solar reforming process
Yuta Hasegawa, Hiroki Sakai, Miki Haga, Nan Sheng, Tomohiro Akiyama, Takahiro Nomura
SolarPACES 2018
Casablanca, Morocco, Hyatt Regency Casablanca 2018.10.04

 

Shell structure control of Al-Si microsphere as phase change material for high-temperature latent heat storage
Miki Haga, Hiroki Sakai, Yuta Hasegawa, Nang Sheng, Takahiro Nomura
SolarPACES 2018
Casablanca, Morocco, Hyatt Regency Casablanca 2018.10.04

 

page top

 

2017

 

Glycerin-Ethanol Blending on Temperature Programmed Decomposition over Low-Grade Iron Ores
Ade Kurniawan, Keisuke Abe, Kouichi Ohashi, Takahiro Nomura, Tomohiro Akiyama
The 1st International Conference on Energy and Material Efficiency and CO2 Reduction in the Steel Industry (EMECR 2017)
JAPAN, Kobe, International Conference Center, 2017-10-12.

 

Hydrogen Generation via Some Catalytic Reactions over Limonite Ore
Keisuke Abe, Ade Kurniawan, Takahiro Nomura, Tomohiro Akiyama
1st International Conference on Energy and Materials Efficiency and CO2 Reduction in the Steel Industry (EMECR2017)
Kobe International Conference Center, 11-13 October, 2017

 

Dopant distribution analysis of Eu-doped Ca-α-SiAlONvia HAADF-STEM imaging
G. Saito, F. Yamaki, Y. Kunisada, N. Sakaguchi, T. Akiyama
9th International Symposium on Nitrides and Related Materials (ISNT2017)& 5th International Symposium on SiAlONs and Non-oxides (ISSNOX5)
Sapporo, Hokkaido, 2017.8.29

 

Fabrication of AlN fibers via combustion synthesis with Mg additive
Ayako Hiranaka, Julia Lin, Sidney Lin, Tomohiro Akiyama
41st International Conference and Expo on Advanced Ceramics and Composites
Florida, America, 2017.1.22-27

 

page top

 

2016

 

Encapsulation Technology of Metallic Phase Change Materials for High-temperature Thermal Energy Storage
Takahiro Nomura, Nan Sheng, Tomohiro Akiyama
IVth International Symposium on Innovative Materials for Processes in Energy Systems 2016 (IMPRES 2016), poster
Sicily, Italy, 2016.10.23-26

 

Combustion synthesis of AlN microfibers with Mg catalyst
Ayako Hiranaka, Julia Lin, Sidney Lin, and Tomohiro Akiyama
2016 AIChE Annual Student Conference
San Francisco, CA, USA (November 2016)

 

Catalytic application of Ni-containing low grade iron ore
Keisuke Abe, Genki Saito, Takahiro Nomura, Tomohiro Akiyama
The 14th Symposium between USTB & HU
University of Science and Technology of Beijing, 6-9 March, 2016

 

page top

 

2015

High-Temperature Latent Heat Storage Technology to Utilize Exergy of Solar Heat and Industrial Exhaust Heat
Takahiro Nomura, Tomohiro Akiyama
7th International Exergy, Energy and Environment Symposium
France

 

Improvement of cycling performance for nano-Li2MnO3 modified LiMn2O4 cathode used for Li-ion battery devices
Cheng-Gong Han, Chunyu Zhu, Genki Saito, Tomohiro Akiyama
8th Asian Conference on Electrochemical Power Sources (ACEPS-8)
Kunming, Yunnan, China, 2015.8.21-25

 

Thermite-Type Combustion Synthesis of Heusler-Alloy Fe2VAl for Thermoelectric Materials
Keisuke Abe, Asami Kikuchi, Noriyuki Okinaka, Tomohiro Akiyama
3rd International Doctoral Student Symposium on Material Science (IDSS-3), poster session
Hokkaido University, 25-28 February, 2015

 

 

page top

 

2014

 

ZnO nanoparticles synthesis via solution plasma
Genki Saito, Norihito Sakaguchi, Tomohiro Akiyama
10th Japanese-Polish Joint Seminar on Micro and Nano Analysis
Sapporo, Japan, 2014. 10.24

 

Salt-assisted combustion synthesis of β-SiAlON
J. Niu, K. Harada, I. Nakatsugawa, T. Akiyama
4th International Symposium on SiAlONs and Non-oxides (ISSNOX4)
Nagahama, Japan, 2014. 5.25-28

 

page top

 

2013

 

Solution plasma synthesis of metal nanoparticles
G. Saito, Wan Omar Sidiq Bin Wan Mohd Azman, T. Akiyama
Symposium on Green Energy and Technology 2013
Kualalumpur Malaysia, Dec 12-14, 2013

 

Synthesis of tin and tin oxide nanoparticles by solution plasma
G. Saito, T. Akiyama
3rd NANO TODAY CONFERENCE
Matrix, Biopolis, Singapore (Poster) 2013.12.8-11

 

Optimum temperatures for carbon deposition during integrated coal pyrolysis?tar decomposition (CVI ironmaking)
R.B. Cahyono, N. Yasuda, T. Nomura, T. Akiyama
Symposium on Green Energy and Technology 2013
Kualalumpur Malaysia, Dec 12-14, 2013

 

Reduction Improvement of Low-grade Iron Ore by Carbon Deposition through Chemical Vapor Infiltration (CVI) of Pyrolysis Tar
R.B. Cahyono, N. Yasuda, T. Nomura, T. Akiyama
International Conference on Smart Carbon Saving and Recycling for Ironmaking (ICSRI)
Hayama, Kanagawa, Japan, 2-4 Oct., 2013

 

Innovative utilization of steelmaking slag waste for improving the energy efficiency of pyrolysis process
R.B. Cahyono, N. Yasuda, T. Nomura, T. Akiyama
The 6th Regional Conference on Chemical Engineering (RCChE) 2013
Manila Philippines, Dec 2-3, 2103

 

Novel self-propagating high-temperature synthesis (SHS) of β-SiAlON fine powders
J. Niu, I. Nakatsugawa, T. Akiyama
SHS 2013 XII International Symposium on Self-Propagating High Temperature Synthesis
South Padre Island, TX, USA, 201310.21-24

 

Thermodynamics analysis on combustion synthesis of beta-Sialon
X. Yi, J. Niu, T. Akiyama
The IUMRS International Conference on advanced Materials (IUMRS-ICAM) 一般講演(口頭発表)
青島,中国, 2013.9.22-26.

 

Enhanced H2 sorption kinetics for MgH2 nanofibers by the formation of zebra-striped structure on the fibers
C.Zhu, T. Akiyama
3rd NANO TODAY CONFERENCE
Matrix, Biopolis, Singapore (Poster) 2013.12.8-11

 

Controlled synthesis of MgH2 nanofibers via a vapor-solid process and their enhanced H2 storage properties
C. Zhu, T. Akiyama
5th World Hydrogen Technologies Convention (WHTC 2013)
Shanghai, China (Oral presentation) 2013.9.25-28

 

Improvement in Thermal Stability of Phase Change Material by Impregnation into Mesoporous Material
相良昭人,能村貴宏, 沖中 憲之,秋山友宏
Symposium on green energy and technology
Malaysia IIUM 2013.12.12

 

Combustion synthesis of TiFe-based hydrogen storage alloy from ilmenite by utilizing hydrogenation heat of calcium
N. Yasuda, T. Tsuchiya, N. Okinaka, T. Akiyama
XII International symposium of Self-Propagating High Temperature Synthesis
(SHS 2013), Oral presentation, TX, USA, 2013.10.21-24

 

Theory and Application For Recuperating Waste Heat at Steelwork
T. Akiyama and T. Nomura
The ISIJ-VDEh-Jernkontoret Joint Symposium
Osaka University 2013.4.16

 

Life Cycle Materials and Energy Balance of Thermoelectric Generation System Using Exhausted Industrial Heat
Asami Kikuchi, Noriyuki Okinaka, Takeshi Kajihara, Hirokuni Hachiuma, and Tomohiro Akiyama
The 32nd International Conference on Thermoelectrics, June 30-July 4, 2013, Kobe Japan

 

Application of chemical vapor infiltration for new iron-making process
Rochim B. Cahyonoa, Naoto Yasuda, Takahiro Nomura, Tomohiro Akiyama
The 5th Regional Conference on Chemical Engineering "Moving towards the New Chapter in Chemical Engineering amongst ASEAN Region"
PATTAYA, THAILAND. 2013.02.07-08

 

page top

 

2012

 

Thermite Synthesis of Fe2VAl
A. Kikuchi, S. Fukasawa, N. Okinaka, T. Akiyama
he 31st International & 10th European Conference on Thermoelectrics, July 9-12, 2012, Aalborg, Denmark

 

Densification Behavior of Thermoelectric Strontium Titanate during Spark Plasma Sintering
A. Kikuchi, N. Okinaka, T. Akiyama
Powder Metallurgy World Congress & Exhibition. Yokohama, Japan, 2012.10.14-18 (18)

 

Diluent-free combustion synthesis of pure β-SiAlON using natural kaolin
J. Niu, X. Yi, I. Nakatsugawa, T. Akiyama
Powder Metallurgy World Congress & Exhibition. Yokohama, Japan, 2012.10.14-18

 

Production of TiFe-base Hydrogen Storage Alloy From Fe and TiO2 Mixture
T. Tsuchiya, N. Yasuda, N. Okinaka, T. Akiyama
International Symposium on Metal-Hydrogen Systems 2012 (MH2012) (Poster)
京都テルサ 2012.10.21-26 発表:23日

 

In-situ TEM observation on phase transformation of MgH2 to Mg using MgH2 nanofibers
C. Zhu
MH2012 International Symposium on Metal-Hydrogen Systems -Fundamentals and Applications
Kyoto, Japan (2012.10.21-26)  EXCELLENT POSTER AWARD受賞

 

Combustion synthesis of β-SiAlON
T. Akiyama
The 4th Australia-China-Japan Joint Symposium on Iron and Steelmaking
Northeastern University Shenyang, China ( 2012.11.3-6)

 

Recent Combustion Synthesis of β-SiAlON
T. Akiyama(Keynote Speaker)
ICAMME 2012, International Conference on Advances in Manufacturing and Materials Engineering
Kuala Lumpur Malaysia(2012.7.3-5)

 

page top

 

2011

 

Metallic nanoparticles formation from solution plasma using edge-shielded electrode
G. Saito, S. Hosokai, M. Tsubota, T. Akiyama
2nd Nano Today Conference (Poster)
Waikoloa Beach, Hawaii, P4-1 (2011.12.11-15)

 

Initial Activation Behavior of LaNi5 Produced by Self-ignition Combustion Synthesis Using Hydrogenation Heat of Calcium
N. Yasuda, T. Tsuchiya, S. Sasaki, N. Okinaka, T. Akiyama
XI International Symposium on Self-Propagating High Temperature Synthesis (SHS 2011)
EDEN Beach Resort Hotel, Anavyssos, Attica, Greece, P-E21 [CD-ROM](2011.9.5-9)

 

Self-propagating High-temperature Synthesis of Nonstoichiometric Manganese Oxide
M. Hiramoto, N. Okinaka, T. Akiyama
XI International Symposium on Self-Propagating High Temperature Synthesis (SHS 2011)
EDEN Beach Resort Hotel, Anavyssos, Attica, Greece, 8B-2 [CD-ROM](2011.9.5-9)

 

Optimization of Spark-Plasma-Sintering Conditions for Maximizing Figure of Merit of La-Doped SrTiO3
A. Kikuchi, N. Okinaka, T. Akiyama
35th International Conference and Exposition on Advanced Ceramics and Composites (ICACC2011)
Daytona Beach, Florida, USA, ICACC-S6-P112-2011 [CD-ROM] (2011.01.23-28)

 

Controlled synthesis of MgH2/Mg nano/micro-structures by hydriding chemical vapour deposition
C. Zhu, S. Hosokai, T. Akiyama
1st Asian Symposium on Hydrogen Storage Materials. Hangzhou, China, May 23-26, 2011.
ZTG Resort Thousand-island Lake, Hangahou, China (2011.5.23-26)

 

Experimental Study and Exergy Analysis of Self-ignition Combustion Synthesis for Producing Rare-earth Based Hydrogen Storage Alloy
N. Yasuda, T. Tsuchiya, S. Sasaki, N. Okinaka, T. Akiyama
1st Asian Symposium on Hydrogen Storage Materials (AHSM2011)
ZTG Resort Thousand-island Lake, Hangahou, China (2011.5.23-26)

 

page top

 

2010

 

Development of a rotary cylinder atomizing method of slag for the production of amorphous slag particles
Y. Kashiwaya, Y. In-nami, T. Akiyama
8th JAPAN-BRAZIL SYMPOSIUM ON DUST PROCESSING-ENERGY-ENVIRONMENT IN METALLURGICAL INDUSTRIES
Recent Hotel, Fukuoka, Japan (2010.11.1)

 

Reduction kinetics of goethite ore infiltrated and carbonized with tar produced from rapid pyrolysis of biomass
S. Hosokai, K. Matsui, K.-i. Ohno, N. Okinaka, M. Shimizu, T. Akiyama
8th JAPAN-BRAZIL SYMPOSIUM ON DUST PROCESSING-ENERGY-ENVIRONMENT IN METALLURGICAL INDUSTRIES
Recent Hotel, Fukuoka, Japan (2010.11.1)

 

Self-ignition combustion synthesis of LaNi5 alloy utilizing hydrogenation heat of calcium
N. Yasuda, S. Sasaki, N. Okinaka, T. Akiyama
International Symposium on Metal-Hydrogen Systems MH2010
Moscow University, Moscow, Russia (2010.7.19-23) (Poster)

 

Optimization of Holding time for Maximizing Figure of Merit of La-Doped SrTiO3 Prepared by Combusion Synthesis and post Spark Plasma Sintering
A. Kikuchi, N. Okinaka, T. Akiyama
8th European Conference on Thermoelectrics ECT 2010
Societa del Casino, Como, Italy, M1-05 [CD-ROM](2010.9.22-24)

 

Combustion-Synthesis of Metal Hydride for Chiller Using Waste heat
S. Sasaki, N. Yasuda, N. Okinaka, T. Akiyama
5th Annual International Symposium on Environment
St George Lycabettus Boutique Hotel, Athens, Greece, III-2 [CD-ROM](2010.5.20-23)

 

Preparation of beta-Si6-zAlzOzN8-z (z=1-3) by combustion synthesis
X. Yi, K. Watanabe, T. Akiyama
3rd International Congress on Ceramics
Osaka International Convention Center, Osaka, Japan (2010.11.14-18)

 

Investigation of MgH2 Production at Low H2 pressure via Hydriding Chemical Vapor Deposition
C. Zhu, S. Hosokai, T. Akiyama
Renewable Energy 2010
Pacifico Yokohama, Yokohama, Japan (2010.6.27-7.2)

 

Acceleration of iron-ore reduction with biomass tar infiltration and its carbonization
S. Hosokai, K. Matsui, K. Ohno, N. Okinaka, M. Shimizu and T. Akiyama
13th Asia Pacific Confederation of Chemical Engineering Congress (Appche 2010)
Haward International House, Taipei, 10536 [CD-ROM](2010.10.5-8)

 

Solution Glow Discharge for Synthesis of Ni Nanoparticles
G. Saito, S. Hosokai and T. Akiyama
13th Asia Pacific Confederation of Chemical Engineering Congress Appche2010
Haward International House, Taipei, (2010.10.5-8)

 

page top

 

2009

 

BIOTAR IRONMAKING USING WOODEN BIOMASS AND NANO-POROUS IRON ORE
K. Matsui, J. Hayashi, Y. Kashiwaya, T. Akiyama
The 5th International Congress on the Science and Technology of Ironmaking
Shanghai, China (2009.10.19-23)

 

HEAT TRANSPORTATION SYSTEM FROM STEELWORKS TO CHEMICAL PLANTS
T. Nomura, N. Okinaka, T. Akiyama
The 5th International Congress on the Science and Technology of Ironmaking
Shanghai, China, B4-3-13 [CD-ROM] (2009.10.19-23)

 

Optimization of Sintering Temperature for Producing Thermoelectric Device of La-Doped SrTiO3
A. Kikuchi, L. Zhang, N. Okinaka, T. Tosho, T. Akiyama
CHEMECA 2009
Burswood Entertainment Complex, Perth, Western Australia, 39-5 [CD-ROM] (2009.9. 27-30)

 

MECHANICAL ACTIVATION OF COMBUSTION-SYNTHESIZED LaFeO3 AS CATALYST FOR DIESEL SOOT OXIDATION
K. Taniguchi, T. Hirano, T. Tosho, T. Akiyama
CHEMECA 2009
Burswood Entertainment Complex, Perth, Western Australia, 20-3 [CD-ROM] (2009.9. 27-30)

 

TEMPERATURE DEPENDENCE OF ALUMINUM NITRIDE HYDROLYSIS IN ALKALINE SOLUTION
A. Nosaka, N. Okinaka, T. Akiyama
CHEMECA 2009
Burswood Entertainment Complex, Perth, Western Australia, 20-4 [CD-ROM](2009.9. 27-30)

 

HEAT TRANSPORTATION CONTAINER USING PHASE CHANGE MATERIAL TO RECOVER UNUSED THERMAL ENERGY
T. Nomura, A. Kaizawa, H. Kamano, A. Kawai, T. Jozuka, T. Senda, N. Okinaka, T. Akiyama
CHEMECA 2009
Burswood Entertainment Complex, Perth, Western Australia, 13-4 [CD-ROM](2009.9.27-30)

 

page top

 

2008

 

MULTI-POD SHAPED SrTiO3 CRYSTALS
T. Toshima, S. Tanda, H. Ishikawa, T. Akiyama
INTERNATIONAL CONFERENCE on ENVIRONMENT 2008, Environmental Management and Technologies Towards Sustainable Development
Penang, MALAYSIA (2008.12.15-17) (Poster)

 

DEVELOPMENT OF PHASE CHANGE COMPOSITE FOR THERMAL ENERGY STORAGE BY IMPREGNATION METHOD
T. Nomura, N. Okinaka, T.Akiyama
INTERNATIONAL CONFERENCE on ENVIRONMENT 2008, Environmental Management and Technologies Towards Sustainable Development
Penang, MALAYSIA, M-33 [CD-ROM](2008.12.15-17)

 

PRODUCTION OF HYDROGEN AND ZEOLITE BY RECYCLING OF WASTE METALS
T. Hiraki, A. Nosaka, N. Okinaka, T. Akiyama
INTERNATIONAL CONFERENCE on ENVIRONMENT 2008, Environmental Management and Technologies Towards Sustainable Development
Penang, MALAYSIA, O-23 [CD-ROM](2008.12.15-17)

 

BIOMASS IRONMAKING USING LIMONITE ORE AND TAR
T. Akiyama and Y. Hata
13th VDEh-ISIJ-Seminar November 2008 Munster, New Scope of Iron and Steelmaking Consistent with Environment
Hotel Kaiserhof, Bahnhofstrasse 14, 48143 Munster,Germany (2008.11.8)

 

Thermoelectric Properties of Rare Earth-Doped SrTiO3 Prepared by Combustion Synthesis and Spark Plasma Sintering
N. Okinaka, L. Zhang, T. Akiyama
7th Japan-Brazil Symposium on Dust Processing-Energy-Environment in Metallurgical Industries and 1st International Seminar on Self-Reducing and Cold Bounded Agglomeration
Sao Paulo City, Sao Paulo State, Brazil, 14227 [CD-ROM](2008.9.8-10)

 

BIOMASS IRONMAKING USING GOETHITE ORE AND PINE TREE
T. Akiyama, Y. Hata
7th Japan-Brazil Symposium on Dust Processing-Energy-Environment in Metallurgical Industries
ABM auditorium Sao Paulo City, Sao Paulo State, Brazil,(2008.9.8)

 

Thermoelectric properties of combustion synthesized rare-earth-doped SrTiO3 for high-temperature heat recovery
L. Zhang, N. Okinaka, T. Tosho, T. Akiyama
1st Asian Conference on Innovative Energy & Environmental Chemical Engineering(ASCON-IEEChE)
Sapporo, Japan, P78 [CD-ROM](2008.8.31-9.3)

 

page top

 

2007

 

Thermoelectric Properties of Rare-Earth-Doped SrTiO3 Synthesized by Combustion Synthesis
L. Zhang, N. Okinaka, T. Tosho, T. Akiyama
International Symposium on Innovative Materials for Processes in Energy Systems (IMPRES)
Kyoto Research Park, Kyoto, S5-3 [CD-ROM](2007.10.28-31)

 

Direct Production of Pressurized Hydrogen from Waste Aluminum without Gas Compressor
T. Hiraki, N. Okinaka, H. Uesugi and T. Akiyama
International Symposium on Materials Issues in a Hydrogen Economy
Richmond, Virginia, U.S.A,pp. 54-61 (2007.11.13)

 

Mechanically Activated SHS of β-Sialons in N2 Atmosphere of 1 Mpa
K. Aoyagi, R. Sivakumar, T. Watanabe, and T. Akiyama
IX International Symposium on Selt-propagating High-temperature Synthesis, (SHS2007)
Dijon, France, T3-16, (2007.7.1-5)

 

Self-Propagating High-Temperature Synthesis of La1-SrXFeO3 Perovskite for The Catalytic Combustion of Soot
T. Hirano, T. Tosho, T. Watanabe, and T.Akiyama
IX International Symposium on Selt-propagating High-temperature Synthesis, (SHS2007)
Dijon, France, T3-16, (2007.7.1-5)

 

Recycling of Waste Aluminum with Generation of High-Pressure Hydrogen
T. Akiyama, N. Okinaka, and T. Hiraki
Bilateral Symposium on Sustainable Engineering, Yogyakarta
Indonesia,pp.4, (2007.5.14), (Keynote Speaker)

 

Self-Propagating High-Temperature Synthesis of La1-xSrxMnO3 for Oxidation Catalyst
T. Tosho, T. Hirano, N. Okinaka, T. Watanabe, and T. Akiyama
International Conference on Mining, Materials and Petroleum Engineering (ICFT2007)
Phuket, Thailand, ID,0022, (2007.5.10-12)

 

page top

 

2006

 

Microstructure of the MgH2 Synthesized by Hydriding Chemical Vapor Deposition
I. Saita, T. Toshima, S. Tanda, and T. Akiyama
Materials Research Society, (2006 MRS Fall Meeting)
Boston, MA, (2006.11.27-12.1)

 

Feasibility of Heat Transportation System Using Latent Heat for Municipal Use
A. Kaizawa, T, Akiyama
Japan 6th Japan-Brazil Symposium on Dust Processing-Energy-Environment in Metallurgical Industries
Poster Session, Hokkaido University, Sapporo, pp.44-47, (2006.11.22-23)

 

Hydrogen Generation by Hydrolysis of MgH2
H. Hayashi, I. Saita, X. Zhang and T. Akiyama
Japan 6th Japan-Brazil Symposium on Dust Processing-Energy-Environment in Metallurgical Industries
Poster Session, Hokkaido University, Sapporo, pp.44-47, (2006.11.22-23)

 

Tar Deposition Within Porous Iron Ore
Y. Hata, S. Hosokai, X. Zhang, H. Purwant, J. Hayashi, T. Akiyama
Japan 6th Japan-Brazil Symposium on Dust Processing-Energy-Environment in Metallurgical Industries
Poster Session, Hokkaido University, Sapporo, pp.44-47, (2006.11.22-23)

 

Coproduction of Hydrogen and Zeolite from Waste Silicon and Aluminum
R. Iwasaki, T. Hiraki, X. Zhang and T. Akiyama
Japan 6th Japan-Brazil Symposium on Dust Processing-Energy-Environment in Metallurgical Industries
Poster Session, Hokkaido University, Sapporo, pp.44-47, (2006.11.22-23)

 

Cost-effective b-SiAlON Production by Combustion Synthesis
K. Aoyagi, R. Sivakumar, T. Akiyama
Japan 6th Japan-Brazil Symposium on Dust Processing-Energy-Environment in Metallurgical Industries
Poster Session, Hokkaido University, Sapporo, pp.44-47, (2006.11.22-23)

 

Combustion Synthesis of High Performance TiFe
M. Sato, I. Saita, H. Uesugi, T. Akiyama
Japan 6th Japan-Brazil Symposium on Dust Processing-Energy-Environment in Metallurgical Industries
Poster Session, Hokkaido University, Sapporo, pp.44-47, (2006.11.22-23)

 

Self-propagating High-temperature Synthesis of Sr doped LaMnO3 Perovskite for Catalytic Combustion of Propane
T. Hirano, T. Tosho, T. Watanabe, T. Akiyama
Japan 6th Japan-Brazil Symposium on Dust Processing-Energy-Environment in Metallurgical Industries
Poster Session, Hokkaido University, Sapporo, pp.44-47, (2006.11.22-23)

 

Flash Synthesis of Nano-sized Titanium Oxide Particles
Y. Kitamura, N. Okinaka and T. Akiyama
Japan 6th Japan-Brazil Symposium on Dust Processing-Energy-Environment in Metallurgical Industries
Hokkaido University, Sapporo, pp.78-79, (2006.11.22-23)

 

Green Hydrogen Production by Hydrolysis of Waste Aluminum
T. Hiraki and T. Akiyama
Japan 6th Japan-Brazil Symposium on Dust Processing-Energy-Environment in Metallurgical Industries
Hokkaido University, Sapporo, pp.44-47, (2006.11.22-23)

 

Thermoelectric Properties of Sr1-xLaxTiO3 for Waste Heat Recovery on Steel Works
L. Zhang, N. Okinaka, T. Tosho, T. Akiyama
Japan 6th Japan-Brazil Symposium on Dust Processing-Energy-Environment in Metallurgical Industries
Hokkaido University, Sapporo, pp. 68-71, (2006.11.22-23)

 

b-SiAlON Ceramics by Combustion Synthesis using Si Scraps
R. Sivakumar, K. Aoyagi, and T. Akiyama
Japan 6th Japan-Brazil Symposium on Dust Processing-Energy-Environment in Metallurgical Industries
Hokkaido University, Sapporo, pp.44-47, (2006.11.22-23)

 

Hydriding Combustion Synthesis of TiFe
I. Saita, T. Toshima, S. Tanda, and T. Akiyama
International Symposium on Metal-Hydrogen Systems-Fundamentals a Applications-(MH2006),
Lahaina, Hawaii, (2006.10.1-6)

 

Hydrogen Storage Property of MgH2 Single-Crystal Nano-Fiber
I. Saita, T. Toshima, S. Tanda, and T. Akiyama
International Symposium on Metal-Hydrogen Systems-Fundamentals a Applications-(MH2006),
Lahaina, Hawaii, (2006.10.1-6)

 

Green Hydrogen Production From Waste Aluminum
T. Hiraki, H. Uesugi, M. Iida, T. Akiyama
FUEL CELLS Science & Technology 2006, Turin, Italy, (2006.9.13-14)

 

Exergy and energy evaluations of blast furnace cement production
H. Purwanto and T.Akiyama
11th Asian Pacific Confederation of Chemical Engineering (APCChE) Kuala Lumpur,
Malaysia,No.382, (2006.8.28-30)

 

Self-propagating high-temperature synthesis of Sr-doped LaMnO3 perovskite for diesel catalyst
T. Hirano, H.Purwanto, T.Watanabe and T.Akiyama
11th Asian Pacific Confederation of Chemical Engineering (APCChE) Kuala Lumpur,
Malaysia,No.382, (2006.8.28-30)

 

Single-Crystal Nano-Fiber of Metal Hydride Synthesized by Hydriding Chemical Vapor Deposition
I. Saita, T. Toshima, S. Tanda, and T. Akiyama
The2nd International Symposium on Micro and Nano Technology, Hsinchu,
Taiwan, pp. 297-300,(2006.3.28-31)

 

page top

 

2005

 

Thermoelectric Properties of Nonstoichiometric TiO as a Promising Oxide Material for High-temperature Thermoelectric Conversion
N. Okinaka, T. Akiyama
24th International Conference on Thermoelectrics (ICT2005)
Clemson University, Clemson, USA, MB5-14 [CD-ROM] (2005.6.19-23)

 

On the Project of Establishing Green-Hydrogen, Based Society in Honjo-Waseda Area
S. Owada, M. Ktuta, H. Uesugi, T. Akiyama, and Y. Matsuzawa
8th International Symposium on East Asian, Resources Recycling Technology (EARTH2005)
Beijing, pp. 32-36, (2005.11.10)

 

Mathematical Modeling of Molten Slag Granulation Using Spinning Disk Atomaizer
H. Purwanto and T. Akiyama
The SIMS2005, Trondheim-Norway, pp. 253-258, (2005.10.13-14)

 

Experimental and Life Cycle Analyses of Hydrogen Production from Waste Aluminum
T. Hiraki, M. Takeuchi, M. Hisa, H. Uesugi and T. Akiyama
World Hydrogen Technologies Convention 2005,
Singapore, pp.5B-4, (2005.10.3-5)

 

New Methane Steam Reformer Using Latent Heat Storage of High Temperature Waste Heat
N. Maruoka, H. Purwanto and T. Akiyama
World Hydrogen Technologies Convention 2005,
Singapore, pp.5B-4, (2005.10.3-5)

 

Utilization of Molten Slag as a Thermal and Chemical Medium for Hydrogen Production from Hydrocarbon
H. Purwanto and T. Akiyama
7th World Congress of Chemical Engineering, SECC,
Glasgow, Scotland, pp. C7-007, (2005.7.10-14)

 

Metal Hydride Production by Hydriding Combustion Synthesis Based on Powder Metallurgy
I. Saita, and T. Akiyama
7th World Congress of Chemical Engineering, SECC,
Glasgow, Scotland, pp. C7-007, (2005.7.10-14)

 

SHS of Mg-Ni-Fe System Hydride
I. Saita, and T. Akiyama
SHS VIII International Symposium on Self-Propagating High-Temperature Synthesis,
Hotel Setar Cagliari, Italy , (2005.6.21-24)

 

SHS of Doped LaGaO3 Perovskite Oxide
H. Ishikawa, M. Enoki, T. Ishihara and T. Akiyama
SHS VIII International Symposium on Self-Propagating High-Temperature Synthesis,
Hotel Setar Cagliari, Italy , (2005.6.21-24)

 

Nanofibers of Hydrogen Storage Alloy
I. Saita, T. Toshima, S. Tanda and T. Akiyama
International Conference on Topology in Ordered Phases (TOP2005)
Sapporo, Poster, pp.111 (No. P23), (2005.3.8 -10)

 

page top

 

2004

 

Hydrogen Production by Using High Temperature Waste Gas in the Steelworks
T. Akiyama, and N. Maruoka
5th Japan-Brazil Symposium on Dust Processing-Energy-Environment in Metallurgical
Industries.Victoria, Espirito Santo Brazil, pp.579-586, (2004.9.12-15)

 

Hydrogen Production by Using Mesh-Shaped PCM for Recovering High Temperature Waste Hert
N..Maruoka,T.Akiyama
15th World Hydrogen Energy Conference
Yokohama,Japan (2004.6.27-7.2) 30J-03

 

Combustion Synthesis of Electrolyte of Solid Oxide Fuel Cells
H.Ishikawa,M.Enoki,T.Ishihara,T.Akiyama
15th World Hydrogen Energy Conference
Yokohama,Japan (2004.6.27-7.2) 30J-03

 

Exergy Analysis of Hydriding Combustion Synthesis
Itoko.Saita,T.Akiyama
15th World Hydrogen Energy Conference
Yokohama,Japan (2004.6.27-7.2) 30J-03

 

Exergy and Economicai Anaiysis of the Hydrogen Production from Waste Hert the Steel lndustry
Hadi.Purwanto,N.Mruoka, T.Akiyama
15th World Hydrogen Energy Conference
Yokohama,Japan (2004.6.27-7.2) 30J-03

 

Coproduction of Hydrogen and Iron At Low.Temperatures(573K)Using Iron Carbide
H.Nakanishi,M.Hisa, A.Tsutsumi,T.Akiyama
15th World Hydrogen Energy Conference
Yokohama,Japan (2004.6.27-7.2) 30J-03

 

page top

 

2003

 

Hydrogen production with moltn slag granulation in steelworks
T.Akiyama, T.Mizuochi, E.Kasai, H.Nogami, J.Yagi
Hydrogen Power Theoretical and Engineering Solutions
Proceedings of HYPOTHESIS V Porto(Italy)(2003,9.7-10) pp.145-153

 

Hydrogen generation by using PCM for high temperature application in the Steelmaking industry
N. Maruoka and T. Akiyama
Hydrogen Power Theoretical and Engineering Solution
Proceedings of HYPOTHESIS V Porto(Italy)(2003,9.7-10) pp.135-144

 

Hydrogen Generation by Using PCM for High Temperature Application in the Steelmaking Industry
N. Maruoka and T. Akiyama
Hydrogen - Power Theoretical and Engineering Solutions
International Symposium (HYPOTHESIS V), Porto Conte, Italy, (2003.9.7-10)

 

Utilization of Waste Silicon from Semiconductor Industry by SHS
M. Hayasaka, and T. Akiyama
Z International Symposium on Self-Propagating
High-Temperature Synthesis (SHS Krakow 2003), Cracow, Poland(2003.7.6-10 )

 

Comparative Analysis of SHSed Mg-based Hydrogen Storage Alloy and Commercial Available One
T. Akiyama, I. Saita and J. Yagi
Z International Symposium on Self-Propagating
High-Temperature Synthesis (SHS Krakow 2003), Cracow, Poland(2003.7.6-10 )

 

Exergy Recovery of LD converter Offgas For Producing Methanol By Utilizing Latent Heat and Reaction Heat
Nobuhiro Maruoka and Tomohiro Akiyama
Efficiency, Costs, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2003)
Proceedings, pp.1481-1488, Copenhagen, Denmark (2003.6.30-7.2)

 

Energy Recovery of Molten Slag By Dry Granulation
T. Akiyama, T. Mizuochi, E. Kasai, H. Nogami and J. Yagi
Tomohiro Akiyama, Toshio Mizuochi, Jun-ichiro YAGI, Efficiency, Costs, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2003),
Proceedings, pp.697-704, Copenhagen, Denmark (2003.6.30-7.2)

 

Feasibility Study of Hydrogen Generator with Molten Slag Granulation
T. Akiyama, T. Mizuochi, E. Kasai, H. Nogami and J. Yagi
3rd International Conference on Science and Technology of Ironmaking
Proceedings pp.563-568, Dusseldorf, Germany(2003.6.16-20)

 

page top

 

2002

 

Urban-Symbiotic Energy System For Iron- and Steelmaking Industries
Jun-ichiro Yagi, Tomohiro Akiyama and Hiroshi Nogami
Fourth Japan-Brazil Symposium on Dust Processing-Energy-Environment in Metallurgical
Industries, Proceedings, pp.1-16, Sao Paulo, Brazil (2002.9.23-24)

 

Hydriding Combustion-Synthesis of Mg2NiH4
Itoko Saita, liquan Li, Katsushi Saito, and Tomohiro Akiyama
Proc.of International Symposium on Metal-Hydrogen Systems-Fundamental and Applications,159 (200)Annecy (2002.9)

 

Granulation of Molten Slag for Heat Recovery
Toshio Mizuochi, Tomohiro Akiyama, and Jun-ichiro Yagi
Proc.of Intersociety Energy Conversion Engineering Conference 20056(2002)
Washington (2002.6)

 

(Invited) Novel Fabrication of Active Hydrogen Storage Alloy Based on Combustion Synthesis
Tomohiro Akiyama and Jun-ichiro Yagi
Electro Chemical Society. Philadelphia, (2002.5.12-17)

 

page top

 

2001

 

(Invited)The Concept of Exergy; Hint for Solution of Energy Problem and Environmental Problem
T.Akiyama
8th Asian Symposium on Ecotechnology - Toyama (ASET8)(2001.12.6-7),pp.294-297(2001).

 

(INVITED)Innovative Processing and Fabrication of Hydrogen Storage Alloy
J.Yagi, T.Akiyama, L.Li
Processing and Fabrication of Advanced Materials, Tenth International Symposium (AMS International)(2001.11.5-8)

 

Exergy Analysis of Ironmaking Processes For Reduction of Carbon Dioxide Emission
J.Yagi and T.Akiyama
Third Japan-Brazil Symposium on Dust Processing-Energy-Environment in Metallurgical
Industries, Proceedings, pp.1-14, Sao Paulo, Brazil (2001.10.25-26).

 

Exergy and Carbon Dioxide Emission Analyses on Ironmaking Processes
J.Yagi and T.Akiyama
Efficiency, Costs, Optimization, Simulation and Environmental Impact of Energy Systems
(ECOS 2001) Proceedings, pp.679-685., Istanbul, Turkey(2001.7.4-6 )

 

Catalyst Development for Methanol and Dimethyl Ether Production from Blast FurnaceOff Gas
Jun-ichiro Yagi, Tomohiro Akiyama and Atsushi Muramatsu
Proceedings of the 3rd International Symposium, Reaction Kinetics and the development and operation of catalytic processes
pp.435-443, April 22 to 25, 2001, Oostende(Belgium)

 

page top

 

2000

 

Exergy Analysis on the Integrated System of Blast Furnace Ironmaking and MethanolSynthesis
T. Akiyama and J. Yagi
Second Japan-Brazil Symposium on Dust Processing-Energy-Environment in Metallurgical Industries, Proceedings
pp.149-166, Sendai, Japan (2000.10.6)

 

Methanol and Dimethyl Ether Synthesis from Blast Furnace Off Gas
J. Yagi, T. Akiyama and A. Muramatsu
Second Japan-Brazil Symposium on Dust Processing-Energy-Environment in Metallurgical Industries, Proceedings,
pp.35-48, Sendai, Japan (2000.10.6)

 

Heat and Material Recovery from Molten Slag by Using Methane-Steam Reaction
T. Shimada, T. Akiyama, E. Kasai and J. Yagi
Second Japan-Brazil Symposium on Dust Processing-Energy-Environment in Metallurgical
Industries, Proceedings, pp.7-22, Sendai, Japan (2000.10.6)

 

Transient Mathematical Model of Blast Furnace Based on Multi-Fluid Concept
J. Yagi, H. Nogami, T. Akiyama and J. A. Castro
International Congress on Mineral Processing and Extractive Metallurgy
Melbourne Australia (2000.9.12)

 

Process Integration of Ironmaking Blast Furnace with Methanol Synthesis
J.Yagi and T.Akiyama
Efficiency, Costs, Optimization, Simulation and Environmental
Impact of Energy Systems (ECOS 2000) Proceedings, pp.1401-1410.(2000.7.5-7)

 

Hydrogen Densification in Metal Hydride
T.Akiyama and J.Yagi
HYDROGEN ENERGY PROGRESS XIII
(Beijing) (2000), Z.Q.MAO and T.N.VEZIROGLU(eds) [International Association for Hydrogen Energy] pp.515-518.(2000.6.11-14)

 

Simultaneous Recovery of Heat and Material from Molten Slag by Using Chemical Reaction
S.Shimada, T.Akiyama, E.Kasai and J.Yagi
ASIA STEEL 2000

 

Analysis of Packed Bed Processes for Melting Waste Materials
J.Yagi, R.Takahashi, X.Zhang, T.Akiyama and S.Kume
International Conference on Steel and Society (ICSS 2000)
Osaka, Japan

 

page top

 

1999

 

Numerical Analysis for Moving Bed Iron Scrap Melting Funace
X. Zhang, H. Nogami, R. Takahashi, T. Akiyama and J. Yagi
Second International Conference on CFD in the Mineral and Process Industries CSIRO
Melbourne, Australia (1999.11)

 

Advanced Technology for Utilizing Waste Heat and Waste Materials from Steel Industries
T.Akiyama and J.Yagi
First Japan-Brazil Symposium on Dust Processing-Energy-Environment in Metallurgical Industries, Proceedings
pp.117-130, Sao Paulo, Brazil(1999.10.5)

 

Transient Mathematical Model of Blast Furnace Based on Multi-fluid Concept, withApplication to High PCI Operation
J.A. Castro, H. Nogami, T. Akiyama and J. Yagi
First Japan-Brazil Symposium on Dust Processing-Energy-Environment in Metallurgical Industries, Proceedings
pp.17-36, Sao Paulo, Brazil(1999.10.5)

 

Combustion Synthesis of Hydrogen Storage Alloy
N.Ishikawa, T.Akiyama and J.Yagi
The 34th Intersociety Energy Conversion Engineering, Conference Proceedings
No.1999-01-2522(1999.8)

 

Theoretical Minimum Exergy Consumption and Reduction Limit of Carbon Dioxide Emission From Ironmaking System
J.Yagi and T.Akiyama
Efficiency, Costs, Optimization, Simulation and Environmental Aspects of Energy Systems (ECOS’99)
(Tokyo, Japan),(1999), pp.128-133

 

An unsteady state mathematical modeling of the blast furnace based on multi-fluid concept
J.Yagi, , H.Nogami,, T.Akiyama and J.A.Castro
Two-phase flow modelling and experimentation 1999
(Pisa, Italy.) (1999), pp.705-1711.

 

page top

 

1998

 

Numerical Analysis of Blast Furnace Operations Based on Multi-Fluid Concept
J.Yagi, H.Nogami, T.Akiyama, and P.R.Austin
Third International Conference on Multiphase Flow, ICMF’98
(France, Lyon), (1998),pp.388-395

 

page top

 

1997

 

Numerical Analysis of a Moving Bed for Iron Scrap Melting
J.Yagi, R.Takahashi, T.Akiyama and X.Zhang
Proceeding of the Julian Szekely Memorial Symposium on Materials Processing
Edited by H.Y.Song, J.W.Evans and D.Apelian [TMS Publisher](1997), pp.83-100

 

page top

 

1996

 

Fluid Flow and Heat Transfer Analysis of Iron Scrap Melting in a Coke Moving Bed
Yagi, R.Takahashi, T.Akiyama, X.Zhang and M.Niu
Fifth Asian Conference on Fluid-Bed and Three-Phase Reactors(Hsitou) (1996), pp.394-399

 

Methanol Synthesis From Industrial Waste Gas
J.Yagi, T.Akiyama and A.Muramatsu
IUPAC CHEMRAWN IX (World Conference on The Role of Advanced Materials in Sustainable Development)
(1996) (Seoul), p.143.

 

New Production Method of Hydrogen Storage Alloy Using Combustion Synthesis
T.Akiyama, H.Isogai and J.Yagi
HYDROGEN ENERGY PROGRESS XI (Stuttgart) (1996), Veziroglu,T.N. et al
(eds) [International Association for Hydrogen Energy] , pp.2279-2283.

 

Heat Transfer in Iron Scrap Melting Process
H.Nogami, T.Akiyama, R.Takahashi and J.Yagi
The 5th World Congress of Chemical Engineering
(San Diego), 1(1996), pp.566-570

 

page top

 

1995

 

Development of Urban-Symbiotic Energy System for Iron- and Steelmaking Industries
Yagi and T.Akiyama
2nd Regional Conference on Present and Future of Steel Industries in the Asian-Pacific Countries
(Bangkok),D(1995),1-8

 

Methanol Synthesis from the Waste Gas of Ironmaking Blast Furnace with Natural Gas Injection
H.Sato, A. Muramatsu, T. Akiyama, T. Sugimoto and J. Yagi
23rd Australian Chemical Engineering Conference
(Adelaide) 2(1995), pp. 36-46

 

Simulation of Solid Flow in Moving Beds
Yagi, T.Akiyama and H.Nogami
International Congress For Particle Technology .(PARTEC 1995)
(Nuernberg)(1995), pp.347-356.

 

Prediction of Dynamic Two Dimensional Behavior of Fine Powder Injected From Lateral Inlets Into the Packed Bed
Chen, T.Akiyama and J.Yagi
2nd International Conference on Multiphase Flow
(Kyoto)(1995), pp.tp1-8.

 

page top

 

1994

 

Gas-Powder Two Phase Flow in a Packed Bed
Chen, H.Nogami, T.Akiyama, R.Takahashi and J.Yagi
The 1st International Congress on Science and Technology of Ironmaking (ICSTI 1994)
(Sendai)(1994), pp.577-582

 

page top

 

1992

 

Assessment of Ironmaking Systems from the Exergy Consumption and Carbon-Dioxide Emission
J.Yagi and T. Akiyama
1st Regional Conference on Present and Future of Steel Industries in the Asian-Pacific Countries
(Bangkok), No.7(1992), pp.1-13

 

Fundamental Study on the Three-Phase Flows in Packed Beds
J.Yagi, J. Wang and T. Akiyama
The 6th JAPAN-CHINA Symposium on Science and Technology of Iron and Steel
(Chiba)(1992), pp.48-55

 

Mathematical Analysis on Exergy Consumption and Carbon Dioxide Discharge in Ironmaking Systems
Yagi and T.Akiyama
Proc. 10th Process Technology Conference (AIME)
(Toronto) (1992),pp.96-97

 

page top

 

1991

 

Exergy and CO2 Analyses of Conventional and New Ironmaking Systems
T.Akiyama and J.Yagi
The 4th World Congress of Chemical Engineering
(Karlsruhe), (1991), pp.6.3-16

 

page top

 

1990

 

Heat Transfer Simulation on Drying Processes of Nonfired Iron Oxide Pellets Containing Combined Water
T.Akiyama, R.Takahashi and J.Yagi
International Congress of Chemical Engineering, Chemical Equipment Design And Automation (CHISA 1990)
(Praha) (1990) , pp.1-10

 

Drying and Reduction of Cement-Bonded Pellets By Using a Moving Bed Reactor
Takahashi, T.Akiyama and J.Yagi
Proc. 6th Int. Iron and Steel Congress
(Nagoya), 1(1990), pp.108-115

 

page top

 

1989

 

Rates of Reduction and Heat Transfer For Nonfired Pellets
Yagi, R.Takahashi and T.Akiyama
The 5th Japan-China Symposium on Science and Technology of Iron and Steel
(Kobe)(1989), pp.82-95

 

page top

 

1988

 

Reduction Experiments by Moving Beds and Exergy Evaluation
Takahashi, T.Akiyama and J.Yagi
Pacific Area Chemical Engineering Congress (PAChEC’88)
(Acapulco), (1988), pp.251-252.

 

page top

 

1987

 

Exergy Analysis of Blast Furnace, Direct Reduction and Smelting Reduction Systems
Yagi and T.Akiyama
The 4th Japan-China Symposium on Science and Technology of Iron and Steel
(Shanghai) (1987), pp.51-63

 

Exergy Analysis of Conventional and New Ironmaking Systems
T.Akiyama and J.Yagi
Proc. 7th Process Technology Conference(AIME) (Toronto), (1987), pp.179-193

 

page top

 

1986

 

A Study of Reduction of Iron Oxides with H2 -CO-CO2 Mixtures by Means of Gas Analysis
Ishii,T.Akiyama,N.Kasai,Y.Kashiwaya and S.Kondo
Proc. 5th Int. Iron and Steel Congress(AIME) (Washington), 6(1986), pp.9-17

 

page top

トップへ戻る