Publications
2022
- T. Oikawa, Y. Natsume, M. Ohno
“Application of Heat Transfer Coefficient Estimation Using Data Assimilation and a 1-D Solidification Model to 3-D Solidification Simulation “
ISIJ International, 62 (2022), 1666.
- E. Miyoshi, M. Ohno, Y. Shibuta, A. Yamanaka, T. Takaki
“Validating a mean-field theory via large-scale phase-field simulations for abnormal grain growth induced by nonuniform grain boundary properties “
Journal of Materials Science, 57 (2022), 16690.
- A. Yamamura, S. Sakane, M. Ohno, H. Yasuda, T. Takaki
“Data assimilation with phase-field lattice Boltzmann method for dendrite growth with liquid flow and solid motion “
Computational Materials Science, 215 (2022), 111776.
- G. Kim, R. Yamada, T. Takaki, Y. Shibuta, M. Ohno
“Inverse analysis of anisotropy of solid-liquid interfacial free energy based on machine learning “
Computational Materials Science, 207 (2022), 111294.
- R. Yamada, M. Kudo, G. Kim, T. Takaki, Y. Shibuta, M. Ohno
“Time invariance of three-dimensional morphology of equiaxed dendrite: A phase-field study “
Computational Materials Science, 204 (2022), 111173.
- T. Takaki, S. Sakane, M. Ohno, Y. Shibuta, T. Aoki
“Phase-field study on an array of tilted columnar dendrites during the directional solidification of a binary alloy “
Computational Materials Science, 203 (2022), 111143.
2021
- Y. Nagatsuma, M. Ohno, T. Takaki, Y. Shibuta
“Bayesian Data Assimilation of Temperature Dependence of Solid-Liquid Interfacial Properties of Nickel “
Nanomaterials, 11 (2021), 2308.
- E. Miyoshi, M. Ohno, Y. Shibuta, A. Yamanaka, T. Takaki
“Novel estimation method for anisotropic grain boundary properties based on Bayesian data assimilation and phase-field simulation “
Materials & Design, 210 (2021), 110089.
- R. Yamada, H. Inubushi and M. Ohno
“Ostwald ripening under temperature gradient: A phase-field study“
Journal of Applided Physics, 130 (2021), 015109.
- J. Lee, M. Ohno, Y. Shibuta and T. Takaki
“Uniquely selected primary dendrite arm spacing during competitive growth of columnar grains in Al-Cu alloy“
Journal of Crystal Growth, 558 (2021), 126014.
- G. Saito, T. Zhang, N. Sakaguchi, M. Ohno, K. Matsuura, M. Takeuchi, T. Sano, K. Minoguchi, T. Yamaoka
“In-situ observation of abnormal grain growth in a low-alloyed carbon steel using SEM-EBSD“
Materialia, 15 (2021), 100985.
- G. Saito, N. Sakaguchi, M. Ohno, K. Matsuura, M. Takeuchi, T. Sano, K. Minoguchi, T. Yamaoka
“Effects of cooling rate after hot forging on precipitation of fine particles during subsequent normalizing and austenite grain growth during carburization of Al- and Nb-microalloyed case-hardening steel “
ISIJ International, 61 (2021), 1964-1970.
- R. Yamada, M. Ohno and T. Mohri
“Configurational kinetics studied by Path Probability Method Progress in Materials Science“
Progress in Materials Science, 120 (2021), 100765.
- E. Miyoshi, T. Takaki, S. Sakane, M. Ohno, Y. Shibuta, T. Aoki
“Large-scale phase-field study of anistropic grain growth: Effects of misorientation-dependent grain boundary energy and mobility“
Computationail Materials Science, 186 (2021), 109992.
2020
- M. Ohno
“Quantitative phase-field modeling and simulations of solidification microstructures “
ISIJ Interntional, 60 (2020), 2745-2754.
- T. Koyama, M. Ohno, A. Yamanaka, T. Kasuya and S. Tsukamoto
“Development of Microstructure Simulation System in SIP-Materials Integration projects “
Materials Transactions, 61 (2020), 2047-2051.
- C. Guo, T. Takaki, S. Sakane, M. Ohno, Y. Shibuta, T. Mohri
“Overgrowth behavior at converging grain boundaries during competitive grain growth: A two-dimensional phase-field study “
International Journal of Heat and Mass Transfer, 160 (2020), 120196.
- G. Saito, N. Sakaguchi, M. Ohno, K. Matsuuraa, M. Takeuchi, T. Sano, K. Minoguchib, T. Yamaoka
“Effects of concentrations of micro-alloying elements and hot-forging temperature on austenite grain structure formed during carburization of case-hardening steel“
ISIJ International, 60 (2020), 2549-2557.
- T. Tokunaga, K. Sotomoto, M. Ohno, K. Matsuura
“Development of high corrosion and wear resistant Al-Si alloy coating on AZ80 Mg alloy by hot extrusion “
Journal of Materials Engineering and Performance, 29 (2020), 6355-6362.
- M. Ohno, Y. Oka, S. Sakane, Y. Shibuta and T. Takaki
“Bayesian inference of solid-liquid interfacial properties out of equilibrium “
Physical Review E, 101 (2020), 052121.
- S. Sakane, T. Takaki, M. Ohno, Y. Shibuta, T. Aoki
“Two-dimensional large-scale phase-field lattice Boltzmann simulation ofpolycrystalline equiaxed solidification with motion of a massive number of dendrites “
Computationals Materials Science, 178 (2020), 109639.
- Y. Mitsuyama, T. Takaki, S. Sakane, Y. Shibuta, M. Ohno
“Permeability tensor for columnar dendritic structures: Phase-field and lattice Boltzmann study “
Acta Materialia, 188 (2020), 282-287.
- T. Kinoshita and M. Ohno
“Phase-field simulation of abnormal grain growth during carburization in Nb-added steel “
Computational Materials Science, 177 (2020), 109558.
- Y. Natsume, Y. Oka, J. Ogawa, M. Ohno
“Estimation of time-dependent heat transfer coefficient in unidirectional casting using a numerical model coupled with solidification analysis and data assimilation“
International Journal of Heat and Mass Transfer, 150 (2020), 119222.
- Y. Oka and M. Ohno
“Parameter estimation for heat transfer analysis during casting processes based on ensemble Kalman filter “
International Journal of Heat and Mass Transfer, 149 (2020), 119232.
- T. Takaki, S. Sakane, M. Ohno, Y. Shibuta, T. Aoki
“Large–scale phase–field lattice Boltzmann study on the effects of natural convection on dendrite morphology formed during directional solidification of a binary alloy “
Computational Materials Science, 171 (2020), 109209.
- S. Sakow, T. Tokunaga, M. Ohno, K. Matsuura,
“Microstructure refinement and mechanical properties improvement of Al-Si-Fe alloys by hot extrusion using a specially designed high-strain die”
Journal of Materials Processing Technology, 277 (2020), 116447.
- E. Miyoshi, T. Takaki, M. Ohno, Y. Shibuta
“Accuracy Evaluation of Phase-field Models for Grain Growth Simulation with Anisotropic Grain Boundary Properties”
ISIJ International, 60 (2020), 160-167.
- M. Ohno, Y. Shibuta, T. Takaki
“High Performance Computing of Solidification Microstructures and Emergence of Cross-scale Approach ;”
Materia Japan, Vol. 59 (2020), 139-144.
2019
- M. Ohno, M. Yamashita, K. Matsuura
“Importance of microstructural evolution on prediction accuracy of microsegregation in Al-Cu and Fe-Mn alloys”
International Journal of Heat and Mass Transfer, Vol. 132 (2019), 1004 – 1017.
- G. Kim, T. Takaki, Y. Shibuta, S. Sakane, K. Matsuura and M. Ohno
“A parametric study of morphology selection in equiaxed dendritic solidification”
Computational Materials Science, 162 (2019), 76-81.
- T. Takaki, S. Sakane, M. Ohno, Y. Shibuta, T Aoki
“Permeability prediction for flow normal to columnar solidification structures by large–scale simulations of phase–field and lattice Boltzmann methods”
Acta Materialia, 164 (2019), 237-249.
- M. Ohno, Y. Shibuta and T. Takaki
“Multi-phase-field modeling of transformation kinetics at multiple scales and its application to welding of steel”
Materials Transactions, Vol. 60, No. 2 (2019), 170-179.
- Y. Shibuta, S. Sakane, E. Miyoshi, T. Takaki, M. Ohno
“Micrometer-scale molecular dynamics simulation of microstructure formation linked with multi-phase-field simulation in same space scale films”
Modelling Simul. Mater. Sci. Eng., 27 (2019) 054002.
- T. Takaki, S. Sakane, M. Ohno, Y. Shibuta
“Competitive growth during directional solidification of a binary alloy with natural convection: two-dimensional phase-field study”
Modelling Simul. Mater. Sci. Eng., 27 (2019) 054001.
- S. Sakane, T. Takaki, M. Ohno, Y. Shibuta, T. Aoki
“Acceleration of phase-field lattice Boltzmann simulation of dendrite growth with thermosolutal convection by the multi-GPUs parallel computation with multiple mesh and time step method”
Modelling Simul. Mater. Sci. Eng., 27 (2019) 054004.
- E. Miyoshi, T. Takaki, M. Ohno, Y. Shibuta, S. Sakane, T. Aoki
“Large-scale phase-field simulation of three-dimensional isotropic grain growth in polycrystalline thin films”
Modelling Simul. Mater. Sci. Eng., 27 (2019) 054003.
- S. Sakane, T. Takaki, M. Ohno and Y. Shibuta
“Simulation method based on phase-field lattice Boltzmann model for long-distance sedimentation of single equiaxed dendrite”
Computational Materials Science, 164 (2019), 39-45.
- G. Saito, T. Nakayama, N. Sakaguchi, M. Ohno, K. Matsuura, M. Takeuchi, T. Sano, K. Minoguchi, T. Yamaoka
“Austenite memory during reverse transformation of steels at different heating rates”
Materialia, Vol. 7 (2019), 100409.
- T. Tokunaga and M. Ohno
“Microstructure evolution during superplastic deformation of an Al-coated Mg alloy sheet”
Journal of Alloys and Compounds, 805 (2019), 436-443.
- G. Saito, N. Sakaguchi, M. Ohno, K. Matsuura, M. Takeuchi, T. Sano, K. Minoguchi, T. Yamaoka
“Effects of Fine Precipitates on Austenite Grain Refinement of Micro-alloyed Steel during Cyclic Heat Treatment”
ISIJ International, Vol. 59, No. 11 (2019) 2098–2104.
- T. Koyama, M. Ohno, A. Yamanaka, T. Kasuya, S. Tsukamoto
“Development of Microstructure Simulation System in SIP-Materials Integration Projects”
Materia Japan, Vol. 58 (2019), 494-497.