| |
|
|
上田多門，古内仁，Muhammad Aun BASHIR, “簡易で合理的な接合法の開発 —コンクリート充填鋼殻構造による接合—”，土木学会論文集A1（構造・地震工学），Vol.70，No.5，pp.II_2-II_19，2014.
Tamon Ueda, “Modeling for Frost Damage and Service Life Prediction",
Journal of Thailand Concrete Association, Vol.1, No.1, January-June
2013, pp.1-8.
Ueda, T., Zhang, D. and Furuuchi,
H., “Towards Rational Design
Method for Strengthening of Concrete Structures by External Bonding”,
Civil Engineering Dimension, Vol. 14, No. 3, December 2012 (Special
Edition), pp.196-204, DOI: 10.9744/CED.14.3.196-204.
Tamon Ueda, Muttaqin Hasan, Kohei Nagai, Yasuhiko Sato and Licheng Wang,
“Mesoscale Simulation of
Influence of Frost Damage on Mechanical Properties of Concrete”,
Journal of Materials in Civil Engineering, ASCE, Vol.21, No.6, June
2009, pp.244-252.
Tamon Ueda and Jianguo Dai, “Interface bond between FRP sheets and
concrete substrates: properties, numerical modeling and roles in member
behaviour”, Progress in Structural Engineering and Materials, Vol.7,
No.1, pp.27-43, January-March 2005.
Tamon UEDA, Yasuhiko SATO, Tsunemasa ITO and Katsuhide NISHIZONO,
“Shear Deformation of Reinforced Concrete Beam”
a)
Journal of
Concrete Structures, Pavements, JSCE, No.711/V-56, pp.205-215, August
2002.
b)
Concrete
Library International, JSCE, No.43, pp.9-23, June 2004.
Tamon Ueda, Ryuichi Yamaguchi, Kazuteru Shoji, and Yasuhiko Sato,
“Study on Behavior in Tension of Reinforced Concrete Members
Strengthened by Carbon Fiber Sheet”, Journal of Composites for
Construction, ASCE, Vol.6, Nr. 3, pp.168-174, August 2002.
Tamon Ueda and Yasuhiko Sato, “New
Approach for Usage of Continuous Fiber as Non-Metallic Reinforcement of
Concrete”, Structural Engineering International, International
Association for Bridge and Structural Engineering (IABSE), Vol.12, No.2,
May 2002, pp.111-116.
T. Ueda, M. Zahran and Y. Kakuta, “Shear fatigue behavior of
steel-concrete sandwich beams”, Concrete Library International of JSCE,
No.33, pp.83-111, June 1999
上田多門（討議）, “崔 益暢他“鉄筋およびＦＲＰロッドを補強材としたコンクリートはりのせん断耐荷性状に関する研究”への討議”, 土木学会論文集No.599/Ⅴ-40、pp.185、1998.8
T. Ueda, K. Nakai, H. Furuuchi and Y. Kakuta, “Shear Strength
Prediction of Steel-Concrete Sandwich Beams”, Composite Construction in
Steel and Concrete, Proc. of Engineering Foundation Conference, Irsee,
Germany, June 9-14, 1996, pp.119-128, 1997
Tamon Ueda, Takayuki Obara, Akihisa
Imamura, Yasuhiko Sato and Yoshio Kakuta, “Influence of Shear Stiffness
and Concrete Wedge Cone Failure on Fracture of Fiber Reinforced Plastic
Rod at Intersection with Concrete Crack”, Mechanics of Composite
Materials, Vol.32, No.2, pp.107-112, March/April 1996.
T. Ueda, N. Pantaratorn and Y. Sato, “Finite element analysis on
shear resisting mechanism of concrete beams with shear reinforcement”,
Journal of Materials, Concrete Structures and Pavements, JSCE, No.520,
V-28, Aug. 1995, p.273-286
上田多門、吉田安範、中村敦、小野武彦、小野定、小原由幸、林川俊郎、角田與史雄、“空気型枠の変形性状に関する実験的解析”、構造工学論文集、土木学会、Vol.40A、1994年3月
T. Ueda and
H.D.E. Putro, "An analytical study of shear strength of prestressed
concrete beams without shear reinforcement"
a)
プレストレストコンクリート、第33巻、第２号、1991年3月、pp.60-65
b)
Concrete
Library International, JSCE, No.22, Dec. 1993, pp.47-54
T. Ueda and B.
Stitmannatithum, "Shear strength of precast prestressed hollow slab with
concrete topping", Structural Journal, American Concrete Institute,
Vol.88, No.4, July-Aug. 1991, pp.402-410
T. Ueda, B.
Stitmanaithum and S. Matupayont, "An experimental investigation on shear
strength of bolt anchorage group", Structural Journal, American Concrete
Institute, Vol.88, No.3, May-June 1991, pp.292-300
|
| |
|
Ueda Tamon, “MESO-SCALE MODELING FOR CONCRETE UNDER COMBINED EFFECTS OF MECHANICAL LOADING AND FROST ATTACK”, The Symposium on Concrete Modelling – CONMOD2018, RILEM, 27th - 28th
August 2018, Delft, Holland, (Presented on 27th August 2018 at
Lijm&Cultuur in Delft).
Ueda Tamon, “Long-term property of interfacial bond for external bonding under ocean environment”, 1st International Symposium on Long-term Exposure and Observation of Structures in Ocean Engineering (LEOSOE’ 2018), 13rd
August 2018, Guangzhou, China, (Presented on 13rd August 2018 at
Ramada Pearl Hotel Guangzhou, China).
Tamon
Ueda, “Unified Prediction Model of Concrete Properties under Various
Single and Combined Effects Based on Meso Scale Approach”, The 6th
International Conference of Euro Asia Civil Engineering Forum,
Green Infrastructure for Future World, 22nd – 25th
August 2017, Hanyang University, Seoul, South Korea, page 122 (Presented
on 24th August 2017)
Ueda Tamon, Justin Shrestha and Zhang Dawei, “MOISTURE
EFFECTS ON FRP-CONCRETE INTERFACE PROPERTY AND BOND MODEL”, Proceedings of the 6th
Asia-Pacific Conference on FRP in Structures (APFIS 2017), 19th – 21st
July 2017, Singapore, 6 pages (Presented on 20th July 2017 at
Shangri-La Hotel, Singapore).
UEDA Tamon, GONG Fuyuan, WANG Yi, WANG Zhao and ZHANG
Dawei, “Performance Assessment of Concrete Structures – General Approach for
Damages under Combined Effects”,
Conference Proceedings – Keynote and Lead papers, ACF 2016 “Sustainable Concrete
for Now and the Future”, 30th October – 2nd November
2016, Hanoi, pp.57-62 (Presented on 31st October 2016 at JW Marriot
Hotel).
Ueda Tamon, Khuram Rashid, Qian Ye, Zhang Dawei, “Effects of temperature
and moisture on concrete-PCM interface performance”, Sustainable Civil
Engineering Structures and Construction Materials, SCESCM 2016, 5-6
September 2016, Denpasar, Bali, Procedia Engineering 171 (2017) 71 – 79,
(also in USB memory) (on 5 September 2016 at Sanur Paradise Plaza
Hotel).
Ueda Tamon, Justin Shrestha, Khuram Rashid and
Zhang Dawei, “Moisture and Temperature Effects on Interface Mechanical
Properties for External Bonding”, Proceedings of the 5th
International Conference on the Durability of Concrete Structures, 30
June – 1 July 2016, Shenzhen University, Shenzhen, China, pp.3-12 (on 1
July 2016 at Shenzhen University).
Tamon Ueda, “GENERAL DESIGN APPROACH FOR ULTIMATE
DEFORMATION OF MEMBERS WITH FRP STRENGTHENING”, Proceedings of the 12th
International Symposium on Fiber Reinforced Polymers for Reinforced Concrete
Structures (FRPRCS-12) & the 5th Asia-Pacific Conference on Fiber
Reinforced Polymers in Structures (APFIS-2015), Joint Conference, 14-16 December
2015, Nanjing, China, 10 pages (USB memory).
Ueda Tamon, “TOWARDS RATIONAL STRUCTURAL INTERVENTION METHODS”,
Proceedings of the 4th Asian Conference on Ecstasy in
Concrete, 8-10 October 2015, Science City, Kolkata, India, pp.9-18 (on 8th
October 2015 at Science City).
Ueda T., Gong F., Sicat, E., Zhang D., “Concrete under Combined Effects
of Frost Damage and Fatigue”, Proceedings of International Symposium on
Reliability of Engineering System, SRES’2015, Hangzhou, China, 15-17
October 2015, 11 pages in USB memory (on 16 October 2015 at Zhejiang
University).
T. Ueda, “Structural retrofitting and renovation for
sustainable infrastructures”, Proceedings of IABSE-JSCE Joint Conference on
Advances in Bridge Engineering – III, 21-22 August 2015, Dhaka, Bangladesh,
pp.49-56 (on 22nd August 2015 at Pan Pacific Sonargaon Dhaka).
Tamon UEDA, “International Cooperation in Asia for
Enhancement of Technological and Educational Capacity”, International Forum on
Improving the Infrastructure and Internationalization of Civil Engineering
Community, 2014 Annual Meeting, Chinese Institute of Civil and Hydraulic
Engineering, Garden Villa Hotel, Kaohsiung, Taiwan, 7th December
2014, pp.35-42.
T. Ueda, “Material Conditions Necessary for
Strengthening Concrete Structures”, Proceedings of 2nd International
Conference on Sustainable Civil Engineering Structures and Construction
Materials, Gadjah Mada University, Yogyakarta, 23-25 September 2014 (24
September), KEY-3, Procedia Engineering 95 (2014) 321 – 334 (also in USB
memory).
Tamon Ueda, “DEBONDING IN STRENGTHENED CONCRETE
MEMBERS”, Proceedings of the 6th International Conference of Asian
Concrete Federation, The-K Seoul Hotel, Seoul, Korea, 21-24 September 2014 (22
September), pp.1-5 (USB memory).
UEDA Tamon, “Ultimate Strength and Deformation of Concrete Members Strengthened
by Jacketing with Various Materials”,
Concrete Innovations and Its Advanced Developments, Proceedings of the 12th
International Conference on Concrete Engineering and Technology 2014 (CONCET
2014), 12-14 August 2014, Subang, Selangor Darul Ehsan, Malaysia, pp.47-60.
UEDA Tamon and ZHANG Dawei: General
Strengthening Design Approach for Sustainable Structures, Proceeding
Book, Keynote Speech, The Second International Conference on Sustainable
Infrastructure and Built Environment (SIBE-2013), 19th-20th
November 2013, Bandung Institute of Technology, Bandung, pp.17-40.
T. Ueda, “Meso-scale Approach for Service Life
Prediction of Concrete Structures under Combined Effects”, Proceedings of the
Fourth Asia-Pacific Young Researchers & Graduates Symposium, Hong Kong, 4-5
December 2012, pp.235-269.
T. Ueda, D. Zhang and H. Furuuchi, “Towards Rational
Design Method for Strengthening of Concrete Structures by External Bonding”,
Proceedings of The Benjamin Lumantara Symposium on Structural Engineering and
Construction Technology, Surabaya, 15 September 2012, pp.14-23.
UEDA Tamon, “Service Life
Prediction of Concrete Structures under Combined Effects”, Proceedings of The
1st International Conference on Sustainable Civil Engineering Structures and
Construction, Yogyakarta, 11-13 September 2012, pp.26-35.
UEDA Tamon, “e3
Program for Hokkaido University under Globalization”,
COPING WITH GLOBALIZATION, Proceedings
for A seminar in commemoration of the 10th anniversary of the English
Engineering Education Program, Hokkaido University, Sapporo, 16-17 September
2010, pp.4-6.
Tamon Ueda, “Role of Asian
Concrete Model Code and JSCE Standard Specifications for International
Code Harmonization”, Codes in Structural Engineering, Developments and Needs for
International Practice, Proceedings and CD-ROM of the Joint
IABSE-fib Conference Dubrovnik 2010, Cavtat Dubrovnik-Neretva County,
Croatia, 3-5 May 2010, pp.87-98.
UEDA Tamon, “Restoration and Strengthening with External
Bonding”, Seminar on Concrete Damage Assessments, Concrete Repair and Concrete
Mix Technology, Hong Kong Concrete Institute, 5 February 2010, Hong Kong,
pp.23-31.
T. Ueda, “Structural Performance of Members Strengthened
by FRP Jacketing with High Fracturing Strain”, Proceedings of the Second
Asia-Pacific Conference on FRP in Structures, International Institute
for FRP in Construction (IIFC), 9-11 December 2009, Seoul, Korea,
pp.19-28.
Tamon UEDA, “ACMC – Performance Based Code for Design, Construction and
Management”, SUSTAINABLE INFRASTRUCTURE Environment Friendly, Safe and Resource
Efficient, IABSE Symposium Bangkok 2009
Report, No.96, pp.15-16,
Proceedings, CD-Rom, 9 pages.
Ueda Tamon, “Rational Durability
Design and Maintenance for Frost Attack and Combined Effects”,
Advances in Concrete Structural Durability, Proceedings of the
International Conference on Durability of Concrete Structures (ICDCS2008), 27-28
November 2008, Hangzhou, China, Vol.1, pp.165-171.
Ueda Tamon, “Structural
Performance and Modeling of Concrete Damaged under Combined Effects”,
Sustainable Concrete Technology and Structures in Local Climate and
Environment Conditions, Proceedings of the 3rd ACF International
Conference, ACF/VCA, 11-13th November 2008, Ho Chi Minh City,
pp.33-43 (CD-ROM).
UEDA Tamon, “Numerical
Modelling for Concrete and Masonry as Heterogeneous and Discontinuum Material”,
Proceedings of 6th International Conference on Analytical Models and
New Concepts in Concrete and Masonry Structures (AMCM’2008), 9-11th
June 2008, Łódź, Poland, pp.171-186.
T. Ueda, “Disaster Prevention of
Concrete Structures by Innovative Materials and Design Concept”, Proceedings of
the International Symposium on Innovation & Sustainability of Structures in
Civil Engineering, 28-30 November 2007, Shanghai, China, pp.10 (the paper not
included in the proceedings due to late submission).
UEDA Tamon, “Future of FRP in
Far East”, Proceedings of Third International IIFC Conference on Composites in
Civil Engineering, International Institute for FRP in Construction (IIFC), 13-15
December 2006, Miami, pp.11-16.
Tamon Ueda, “Modeling for Frost
Damage and Durability Design”, Proceedings of 2nd ACF International
Conference, 21-22 November 2006, Bali, pp.KS-18-KS23 (CD-ROM).
Ueda T.,
“Towards
Harmonization of Design Code in Asia – Structural Concrete –”, Proceedings of
the ACECC Workshop on Harmonization of Design Codes in the Asian Region”, 4
November 2006, Taipei, pp.101-108.
Tamon Ueda and Jianguo Dai, “Asian
Concrete Model Code (ACMC) and its L3 document Maintenance for Chloride Attack”,
Standard for Durability of Concrete and
Concrete Structures, Proceedings of Scientific and Technological Forum by
Chinese Academy for Engineering, 10-11 December 2005, Hangzhou (CD-ROM).
T. Ueda and J.G. Dai, “Interface
of Fiber Reinforced Polymer Laminates Externally Bonded to Concrete Substrate:
from Test Methods to Bond Modeling”, Bond
Behaviour of FRP in Structures, Proceedings of the International Symposium
on Bond Behaviour of FRP in Structures (BBFS 2005), Edited by J.F. Chen and J.G.
Teng, International Institute of FRP in Construction (IIFC), 7-9 December 2005,
Hong Kong, China, pp.23-34.
T. Ueda and J.G. Dai, “FRP Composites for Infrastructures in Japan: Review and
Outlook”, Innovation & Sustainability of
Structures, Proceedings of the International Symposium on Innovation &
Sustainability of Structures in Civil Engineering, 20-22 November, 2005,
Nanjing, Vol.1, pp.305-320.
UEDA Tamon, “FRP for
Construction in Japan and its Future”, Conference Proceedings, ACECON 2005,
Indian Concrete Institute, 22-25 September 2005, Mumbai, pp.VIII45-VIII52.
Ueda, T., “Do We Really Know the
Material Properties Needed for Required Structural Performances?”,
Construction Materials, Proceedings of ConMat ’05 and Mindess Symposium,
22-24 August 2005, Vancouver, CD-ROM.
T Ueda, “Durability Design of
Concrete Structures in Japan: Present and Future”, Application of Codes, Design
and Regulations, Proceedings of the International Conference held at the
University of Dundee, UK on 5-7 July 2005, pp.137-146.
UEDA Tamon, “FRP for Construction in Japan”, Proceedings of JSCE-CICHE Joint
Seminar on Concrete Engineering in Mongolia, 19 May 2005, Ulan Batar, pp.54-68.
T. Ueda and J.G.
Dai, “New shear bond model for FRP-concrete interface – from modeling to
application”, FRP Composites in Civil Engineering – CICE 2004,
Proceedings of the Second International Conference on FRP Composites in Civil
Engineering – CICE 2004, 8-10 December 2004, Adelaide, Australia, pp.69-81.
Ueda Tamon, “Fiber
Related Construction Materials and Related Codes in Japan – Present and Future
–”, Vol.3, Proceedings of International Symposium (Editor: J Sim and S J Yoon),
2004 KSCE Annual Conference, pp.35-46.
UEDA Tamon, “New
Concept for Retrofitting Concrete Structures with Unconventional Materials”,
Proceedings of Third International Symposium on New Technologies for Urban
Safety of Mega Cities in Asia, 18-19 October 2004, pp.37-46 (CD-ROM).
UEDA Tamon, “Meso-Scale Approach for
Prediction of Mechanical Property and Degradation of Concrete”, Proceedings of
The 2nd
International Symposium on the Safety Enhancement of Building and Special Works,
16-18 February 2004, Seoul, CD-ROM, 12 pages.
Tamon Ueda, “Prediction
of Structural Performance during Service Life from Microstructure”, Workshop
Proceedings, Microstructure and Durability to Predict Service Life of Concrete
Structures, Hokkaido University, 10 February 2004, Sapporo, pp.39-48.
Tamon UEDA, “JSCE’s New Standard Specification for Concrete Structures”,
Proceedings of 3rd Asian Concrete Forum, 18 September 2003, Pune,
India, pp.1-7.
T. UEDA, “New Types of Continuous Fiber Reinforcements for Concrete Members”,
Proceedings of the Sixth International Symposium on FRP Reinforcement for
Concrete Structures (FRPRCS-6), Singapore, 8-10 July 2003, pp.51-76.
Tamon Ueda and Shiro Morita, “Recent Activities in Japan Concrete Institute”,
Symposium Proceedings, Asian Concrete Forum, KCI, pp.114-117.
Tamon UEDA, “Asian Concrete Model Code – Its Role to the Region and Relation to
ISO – “, P1-1-4, Proceedings of Structural Engineers World Congress 2002,
October 9-12, 2002, Pacifico Yokohama (CD-ROM).
T. Ueda, “Asian Concrete Model Code – Its role in the region”, Supplementary
Volume, Proceedings of the 17th Australasian Conference on the
Mechanics of Structures and Materials, ACMSM 17, Gold Coast, Queensland,
Australia, 12-14 June 2002, pp.18-22.
Kyuichi MARUYAMA and Tamon UEDA, “JSCE
Recommendations for Upgrading of Concrete Structures with Use of Continuous
Fiber Sheets”, FRP Composite in Civil Engineering,
Proceedings of the International
Conference on FRP Composites in Civil Engineering, Vol.1,
December 2001, pp.99-106.
UEDA T., “JSCE’s Attempt at Unified
Code for Hybrid Structures with Performance-based Design Concept”, US-Japan
Seminar on Advanced Stability and Seismicity Concept for Performance-based
Design of Steel and Composite Structures, 23-26 July 2001, Kyoto, Japan, pp.1-9.
UEDA Tamon, “Codes and Standards for
FRP as Structural Material in Japan”, Composites in Construction – A Reality,
Proceedings of the International Workshop, ASCE, July 2001, pp.36-45.
UEDA Tamon, “Concrete Model Code for
21st ACMC2001”, Proceedings of ICCMC/IBST 2001 International
Conference on Advanced Technologies in Design, Construction and Maintenance of
Concrete Structures, Hanoi, March 2001, pp.38-45.
T. Ueda, “Design Part of Asian
Concrete Model Code (ACMC) – Performance-Based Design Concept With Limit State
Design Methodology –“, Proceedings of International Symposium on Asian Concrete
Model Code, Colombo, 27 March 2000, pp.8-22
T. Ueda, “Retrofit and its method”,
Seminar on Structural Concrete: Design, Construction and Maintenance, The
Structural Concrete Group of the Centre for Construction Material and
Technology, Dept. of Civil Eng., National University of Singapore, 19 Aug. 1998,
pp.65-77
T. Ueda, “Evolution of concrete model code for Asia”, ASEP (Association of
Structural Engineers of the Philippines, Inc.) 7th International Convention,
Manila, Philippines, May 15-17, 1997, pp.1-6
T. Ueda, M. Zahran and Y. Kakuta, “Shear fatigue strength of steel-concrete
sandwich member”, Proc. of the
International Conference on Maintenance and Durability of Concrete Structures,
Hyderabad, India, Mar. 1997, pp.195-201
T. Ueda, T. Obara, A. Imamura, Y. Sato and Y. Kakuta, “Influence of shear
stiffness and concrete wedge cone failure on fracture of fiber reinforced
plastic rod at intersection with concrete crack ", Ninth International
Conference on Mechanics of Composite Materials, Riga, Latvia, Oct. 17-20, 1995.
|
