line decor
    HOME  ::  メンバー  ::  研究室の受賞歴  ::  研究の紹介  ::  論文の紹介  :: virtual open lab  ::  イベント  ::  リンク  :: 連絡先
line decor
   
 
代表的な論文の紹介
コンクリート構造物の補強
  1. Dawei Zhang, Tamon Ueda and Hitoshi Furuuchi, "A General Design Proposal for Concrete Cover Separation in Beams Strengthened by Various Externally Bonded Tension Reinforcements", Journal of Advanced Concrete Technology, Vol.10, No.9, pp.285-300, 2012, doi: 10.3151/jact.10.285.
  2. Khalid Farah, Yasuhiko Sato, Uni-Axial Tension Behavior of Reinforced Concrete Members Strengthened with Carbon Fiber Sheet, ASCE Journal of Composites for Construction, Vol.15, No.2, 215-228, 2011
  3. 山本健太,張  大偉,古内 仁,渡辺忠朋:エポキシ樹脂注入工法によるひび割れ補修が鉄筋の付着性状に与える影響について,コンクリート工学年次論文集, Vol.33, No.2,1429-1434,2011
  4. Dawei Zhang; Tamon Ueda; and Hitoshi Furuuchi, "Average Crack Spacing of Overlay-Strengthened RC Beams", Journal of Materials in Civil Engineering, ASCE, Vol. 23, No. 10, October 2011, pp.1460-1472, DOI: 10.1061/(ASCE)MT.1943-5533.0000316.
  5. ZHANG Dawei, Optimum Treatment of PCM-concrete Interfaces, 7th International Conference on Fracture Mechanics of Concrete and Concrete Structures (FraMCos-7), 2010
  6.  Khalid Farah, Yasuhiko Sato,Numerical Investigation of Tension Behavior of Reinforced Concrete Members Strengthened with FRP Sheets,構造工 学論文集,Vol,55A, 1085-1093, 2009
  7.  D. Zhang, H. Furuuchi, A. Hori, T. Ueda: Fatigue Degradation Properties of PCM-concrete Interface, Journal of Advanced Concrete Technology, Vol.7, No.3, 425-438, 2009
  8.  Jianguo DAI, Tamon UEDA and Yasuhiko SATO,Unified Analytical Approaches for Determining Shear Bond Characteristics of FRP-Concrete Interfaces through Pullout Tests, Journal of Advanced Concrete Technology, Vol.4, No.1, 133-145, 2006
  9.  Dhannyanto ANGGAWIDJAJA, Tamon UEDA, Jianguo DAI, Hiroshi NAKAI, Deformation capacity of RC piers wrapped by New Fiber-reinforced Polymer with Large Fracture Strain, Cement and Concrete Composites, Vol.28, Issue 10, 914-927, 2006
  10.  Dai Jianguo DAI, Tamon UEDA and Yasuhiko SATO, Development of the Nonlinear Bond Stress-Slip Model of FRP Sheet-Concrete Interfaces with a Simple Method, Journal of Composites for Constructions, ASCE, Vol.9, No.1, 52-62, 2005
  11.  Tamon Ueda, Ryuichi Yamaguchi, Kazuteru Shoji, and Yasuhiko Sato, Study on Behavior in Tension of Reinforced Concrete Members Strengthened by Carbon Fiber Sheet, Journal of Composites for Construction, ASCE, Vol.6, No.3, 168-174, 2002
  12.  Roshan Tuladhar, Yoshinori Utsunomiya and Tamon Ueda, New Flexible System of Transverse Reinforcement for RC Piers, Advances in Structural Engineering, Vol.6, No.3, pp.215-230, 2003
  13. Tamon Ueda and Yasuhiko Sato, "New Approach for Usage of Continuous Fiber as Non-Metallic Reinforcement of Concrete", Structural Engineering International, International Association for Bridge and Structural Engineering (IABSE), Vol.12, No.2, May 2002, pp.111-116.
  14.  佐藤靖彦,浅野靖之,上田多門,炭素繊維シートの付着機構に関する基礎研究, 土木学会論文集,No.646/V-47,71-87,2000

RC構造のせん断
  1. Mohamed ZAKARIA, Tamon UEDA and Zhimin WU, Evaluating and Proposing Prediction Models of Shear Crack Width in Concrete Beams, Journal of Japan Society of Civil Engineers, Ser. E2 (Materials and Concrete Structures), Vol.67, No.2, 245-263, 2011
  2. Mohamed ZAKARIA, Tamon UEDA, Zhimin WU and Liang MENG, Experimental Investigation on Shear Cracking Behavior in Reinforced Concrete Beams with Shear Reinforcement, Journal of Advanced Concrete Technology, Vol.7, No.1, 79-96, 2009
  3.  Withit PANSUK and Yasuhiko SATO, Shear Mechanism of Reinforced Concrete T-beams with Stirrups, Journal of Advanced Concrete Technology, Vol.5, No.3, 395-408, 2007
  4.  Yasuhiko SATO, Toshiya TADOKORO, and Tamon UEDA, Diagonal Tensile Failure Mechanism of Reinforced Concrete Beam, Journal of Advanced Concrete Technology, Vol.2, No.3, pp.359-374, 2004
  5.  Tamon UEDA, Yasuhiko SATO, Tsunemasa ITO and Katsuhide NISHIZONO, Shear Deformation of Reinforced Concrete Beam”, Journal of Concrete Structures, Pavements, JSCE, No.711/V-56, 205-215, 2002.
  6.  古内仁,高橋義裕,角田與史雄,RCスラブの自由縁附近載荷に対する実用せん断設計法の研究,土木学会論文集,No.532/V-30,141-149,1996
  7.  佐藤靖彦,上田多門,角田與史雄,せん断補強筋を有する鉄筋コンクリート及びプレストレストコンクリートはりせん断耐力,土木学会論文集,No.544/V-32,pp.43-52,1996
  8.  佐藤靖彦,上田多門,角田與史雄,せん断補強筋を有する連続繊維補強プレストレストコンクリートはりのせん断耐力,土木学会論文集,No.520/V-28,213-224,1995
  9.  佐藤靖彦,上田多門,角田與史雄,有限要素解析による連続繊維補強コンクリートはりのせん断耐荷性状の定性的評価,土木学会論文集,No.484/V-22,51-60,1994

鋼コンクリート合成構造
  1. Taufiq SAIDI, Hitoshi FURUUCHI and Tamon UEDA, The Transferred Shear Force-Relative Displacement Relationship of the Shear Connector in Steel-Concrete Sandwich Beam and its Model,土木学会論文集E, Vol.6, No.1, 122-141, 2008
  2.  Ahmed FARGHALY, Tamon UEDA and Hitoshi FURUUCHI, Punching Shear Failure Mechanism of Open Sandwich Slab and its Parameters' Effects, Advanced Concrete Technology, Vol.3, No.2, 283-296, 2005
  3.  Ryosuke TAKAHASHI, Yasuhiko SATO, Katsuyuki KONNO, and Tamon UEDA, 3D Nonlinear Punching Shear Failure Simulation of Steel-concrete Composite Slab, Journal of Advanced Concrete Technology, Vol.3, No.2, pp. 359-374, 2005
  4.  今野克幸,上田多門,角田與史雄,大平雅司,プレストレスト二重鋼管コンクリート構造の軸方向力下の力学的特性に関する研究,土木学会論文集,No.613,V-42,1-18,1999
  5.  Mohab ZAHARAN, Tamon UEDA and Yoshio KAKUTA, A Study on Fatigue Strength of Steel-Concrete Sandwich Beams without Shear Reinforcement, 土木学会論文集, No.585/V-38, 205-216, 1998
  6.  Mohab ZAHARAN, Tamon UEDA and Yoshio KAKUTA, Shear Fatigue Behavior of Steel-Concrete Sandwich Beams with Shear Reinforcement, 土木学会論文集, No.585/V-38, 217-231, 1998
  7.  浅沼芳雄,中井勝彦,古内仁,上田多門,角田與史雄, 鋼コンクリートサンドイッチはりのせん断耐力, 構造工学論文集,Vol.42A,1139-1146,1996

劣化・損傷メカニクス
  1. Fuyuan Gong, Evdon Sicat, Tamon Ueda, Dawei Zhang, "Meso-scale Mechanical Model for Mortar Deformation under Freeze Thaw Cycles", Journal of Advanced Concrete Technology, Vol.11, No.2, February 2013, pp.49-60, doi:10.3151/jact.11.49.
  2. 林田宏,佐藤靖彦,凍害劣化域の大きさと位置に着目したRCはり部材の破壊性状,コンク リート工学年次論文集, Vol.34, No.1, 922-927, 2012
  3. Evdon SICAT and Tamon UEDA, “Development of a Meso-Scale Deformational Behavior Model of Mortar under Freeze-Thaw Cycles”, Proceedings of JCI, Vol.33, No.1, July 2011, pp.905-910.
  4. Licheng Wang and Tamon Ueda, "Mesoscale modelling of the chloride diffusion in cracks and cracked concrete", Advanced Concrete Technology, Vol.9, No.3, October 2011, pp.241-249.
  5. 三浦泰人,佐藤靖彦,NaCl溶液に浸漬したセメントペースとおよびモルタルの引張軟化 特性評価,コンクリート工学論文 集,Vol.21,No.3,77-86,2010
  6. 松本浩嗣,佐藤靖彦,上田多門,"メソスケール解析による時間依存荷重を受けるモルタルの損傷・破壊メカニズムと変形予測",土木学会論文集E,Vol.66,No.4,2010年10月,pp.380-398.
  7. Tamon UEDA, Muttaqin HASSAN, Kohei NAGAI, Yasuhiko SATO, Licheng WANG, Mesoscale Simulation of Influence of Frost Damage on Mechanical Properties of Concrete, Journal of Materials in Civil Engineering, ASCE, 244-252, 2009
  8.  Koji MATSUMOTO, Yasuhiko SATO, Tamon UEDA, Mesoscopic Analysis of Mortar under High-stress Creep and Low-cycle Fatigue Loading, Journal of Advanced Concrete Technology, Vol.6, No.2, 337-352, 2008
  9.  Muttaqin HASSAN, Tamon UEDA, and Yasuhiko SATO, Stress-Strain relationship of Frost Damaged Concrete Subjected to Fatigue Loading, Journal of Materials in Civil Engineering, ACSE, 37-45, 2008
  10.  Licheng WANG, Mitsutaka SODA, Tamon UEDA, Simulation of Chloride Diffusivity for Cracked Concrete Based on RBSM and Truss Network Model, Journal of Advanced Concrete Technology, Vol.6, No.1, 143-155, 2008
  11.  Kohei NAGAI, Yasuhiko SATO and Tamon UEDA,Mesoscopic Simulation of Failure of Mortar and Concrete by 3D RBSM, Journal of Advanced Concrete Technology, Vol.3, No.3, 385-402, 2005
  12.  Kohei NAGAI, Yasuhiko SATO and Tamon UEDA, Mesoscopic Simulation of Failure of Mortar and Concrete by 2D RBSM, Journal of Advanced Concrete Technology, Vol. 2, No. 3, 359-374, 2004
  13. Muttaqin HASAN, Hidetoshi OKUYAMA, Yasuhiko SATO and, Tamon UEDA, Stress-Strain Model of Concrete Damaged by Freezing and Thawing Cycles, Journal of Advanced Concrete Technology, Vol.2, No.1, 89-99, 2003

その他
  1. 塩永亮介,佐藤靖彦,J.C. Walraven,高強度繊維補強モルタルを適用したRC部材の一軸 引張挙動に関する研究,土木学会論文集 E,Vol.66,No.4,366-379, 2010